Circuit Breakers - Reset
`
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
[SEBU7018]
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Fuses - Replace
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Transmission Oil Filter - Replace
ELECTRICAL AND STARTING SYSTEM
WIRING GP
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Battery Disconnect Switch
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Fuses - Replace
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Circuit Breakers - Reset
Show/hide table
![]() |
Circuit Breaker Reset - Push the button in order to reset the circuit breakers. The button will stay depressed if the circuit is working properly. Check the appropriate electrical circuit if the button does not stay depressed. |
Show/hide table
![]() | |
Illustration 1 | g00994614 |
Circuit breakers are located on the fuse panel at the rear of the cab.
Show/hide table
![]() |
Fan Motor (1) - 15 amp |
Show/hide table
![]() |
Seat Air Compressor (2) - 15 amp |
Show/hide table
![]() | |
Illustration 2 | g00994616 |
Two circuit breakers are located on the right side of the engine compartment below the air cleaner.
Show/hide table
![]() |
Main Circuit (3) - 80 amp |
Show/hide table
![]() |
Alternator (4) - 80 amp |
Information System:
928G Wheel Loader
Shipping the Machine
D6M Track-Type Tractor
Transmission Oil Level - Check
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Fuses - Replace
D6M Track-Type Tractor
Engine Oil Level - Check
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Specifications
928G Wheel Loader
Bulldozing and Dumping
854G Wheel Dozer Hydraulic System
Hydraulic Tank (Steering, Brake)
928G Wheel Loader
Secondary Steering
938G Wheel Loader and IT38G Integrated Toolcarrier
Engine Starting with Auxiliary Start Receptacle - If Equipped
D6M Track-Type Tractor
Walk-Around Inspection
992G Wheel Loader Electrohydraulic System
Pressure Sensor (Implement Pilot Oil)
554 Forwarder and 574 Forwarder
Engine Starting with Jump Start Cables
928G Wheel Loader
Lifting and Tying Down the Machine
928G Wheel Loader
Towing the Machine
651E Wheel Tractor-Scraper
Directional Turn Signal and Hazard Flasher Control
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Transmission Oil Filter - Replace
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Hydraulic System Oil Filter - Replace
651E Wheel Tractor-Scraper
Heating and Air Conditioning Control
966G and 972G Wheel Loaders
Hydraulic System Oil - Change
631E Series II Wheel Tractor-Scrapers
Seat Belt
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Engine Oil and Filter - Change
928G Wheel Loader
Autoshift Control
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Fuel System Primary Filter (Water Separator) Element - Replace
561M Pipelayer
Transmission Selector and Pressure Control Valve - Power Shift