IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Fuses - Replace Caterpillar


Fuses - Replace
`


NOTICE

Replace the fuses with the same type and size only. Otherwise, electrical damage can result.

If it is necessary to replace fuses frequently, an electrical problem exists. Contact your AVSpare dealer.


Fuses - The fuses protect the electrical system from a circuit that has been overloaded. Change a fuse if the element separates. If the element of a new fuse separates, check and repair the circuit.



Illustration 1g00990294

The fuse panel is located at the rear of the operator compartment.

Transmission Control (1) - 10 amp

Secondary Steering (2) (if equipped) - 10 amp

Turn Signals and Rotating Beacon (3) - 10 amp

Quick Coupler (4) (if equipped) - 10 amp

Window Wipers (5) - 10 amp

Payload Control System (6) - 10 amp

Electric Converter (7) - 10 amp

Digital Electrical Monitoring System (8) - 10 amp

Rear Floodlights (9) - 15 amp

Front Floodlights (10) - 15 amp

Lighter (11) - 10 amp

Axle Oil Cooler (12) (if equipped) - 10 amp

Hydraulic System (13) - 10 amp

Implements (14) - 10 amp



Illustration 2g00990364

Additional fuses are located in the engine compartment on the right side of the machine.

Backup Alarm (15) - 10 amp

Brake Lights (16) - 10 amp

Engine Start Switch (17) - 10 amp

Horn (18) - 10 amp

Information System:

D6M Track-Type Tractor Engine Oil Level - Check
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Specifications
928G Wheel Loader Bulldozing and Dumping
854G Wheel Dozer Hydraulic System Hydraulic Tank (Steering, Brake)
928G Wheel Loader Secondary Steering
938G Wheel Loader and IT38G Integrated Toolcarrier Engine Starting with Auxiliary Start Receptacle - If Equipped
D6M Track-Type Tractor Walk-Around Inspection
992G Wheel Loader Electrohydraulic System Pressure Sensor (Implement Pilot Oil)
554 Forwarder and 574 Forwarder Engine Starting with Jump Start Cables
D6M Track-Type Tractor Fuses - Replace
928G Wheel Loader Starting Below 0°C (32°F) with Thermal Starting Aid
992G Wheel Loader Electrohydraulic System Pilot Control Actuator
D6M Track-Type Tractor Transmission Oil Level - Check
928G Wheel Loader Shipping the Machine
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Circuit Breakers - Reset
928G Wheel Loader Lifting and Tying Down the Machine
928G Wheel Loader Towing the Machine
651E Wheel Tractor-Scraper Directional Turn Signal and Hazard Flasher Control
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Transmission Oil Filter - Replace
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Hydraulic System Oil Filter - Replace
651E Wheel Tractor-Scraper Heating and Air Conditioning Control
966G and 972G Wheel Loaders Hydraulic System Oil - Change
631E Series II Wheel Tractor-Scrapers Seat Belt
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Engine Oil and Filter - Change