D6M Track-Type Tractor Engine Oil Level - Check Caterpillar


Engine Oil Level - Check
`
D6M Track-Type Tractor [SEBU6894]
BASIC ENGINE
PAN GP-OIL
D6M Track-Type Tractor Engine Oil Level - Check

------ WARNING! ------

Hot oil and components can cause personal injury.

Do not allow hot oil or components to contact skin.

----------------------


NOTICE

Do not under fill or overfill engine crankcase with oil. Either condition can cause engine damage.





Illustration 1g00100595

  1. Open the access cover that is on the left side of the machine.



    Illustration 2g00100594

  1. Check the dipstick (1) while the engine is stopped. Maintain the oil level between the "LOW" mark and the "FULL" mark.

    Note: When you operate the machine on severe slopes, the oil level in the engine crankcase must be at the "FULL" mark on the dipstick.

  1. Remove oil filler cap (2). If necessary, add oil.

  1. Clean the oil filler cap and install the oil filler cap.

  1. Close the access cover.

Information System:

IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Specifications
928G Wheel Loader Bulldozing and Dumping
854G Wheel Dozer Hydraulic System Hydraulic Tank (Steering, Brake)
928G Wheel Loader Secondary Steering
938G Wheel Loader and IT38G Integrated Toolcarrier Engine Starting with Auxiliary Start Receptacle - If Equipped
D6M Track-Type Tractor Walk-Around Inspection
992G Wheel Loader Electrohydraulic System Pressure Sensor (Implement Pilot Oil)
554 Forwarder and 574 Forwarder Engine Starting with Jump Start Cables
D6M Track-Type Tractor Fuses - Replace
928G Wheel Loader Starting Below 0°C (32°F) with Thermal Starting Aid
992G Wheel Loader Electrohydraulic System Pilot Control Actuator
928G Wheel Loader Starting Above 0°C (32°F)
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Fuses - Replace
D6M Track-Type Tractor Transmission Oil Level - Check
928G Wheel Loader Shipping the Machine
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Circuit Breakers - Reset
928G Wheel Loader Lifting and Tying Down the Machine
928G Wheel Loader Towing the Machine
651E Wheel Tractor-Scraper Directional Turn Signal and Hazard Flasher Control
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Transmission Oil Filter - Replace
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Hydraulic System Oil Filter - Replace
651E Wheel Tractor-Scraper Heating and Air Conditioning Control
966G and 972G Wheel Loaders Hydraulic System Oil - Change
631E Series II Wheel Tractor-Scrapers Seat Belt