Bulldozing and Dumping
`
928G Wheel Loader
[SEBU7015]
MACHINE ARRANGEMENT
1.1. Bulldozing
2.1. Dumping
Bulldozing
Show/hide table
 | |
| Illustration 1 | g00448703 |
Keep the bottom of the bucket parallel to the ground when you are bulldozing.
Dumping
Show/hide table
 | |
| Illustration 2 | g00467533 |
To control dumping, move the tilt control lever to the DUMP position. Then, return the tilt control lever to the HOLD position. Repeat this procedure until the bucket is empty.
Dump the bucket when the wind is moving toward the front of the machine. This will help to keep dust away from the engine. This will also help to maintain visibility.
To achieve the maximum angle for dumping, use the bucket stops.
Show/hide table
| NOTICE |
|---|
Striking the stops unnecessarily and repetitively can result in accelerated wear and high maintenance cost of the loader linkage. |
Information System:
854G Wheel Dozer Hydraulic System
Hydraulic Tank (Steering, Brake)
928G Wheel Loader
Secondary Steering
938G Wheel Loader and IT38G Integrated Toolcarrier
Engine Starting with Auxiliary Start Receptacle - If Equipped
D6M Track-Type Tractor
Walk-Around Inspection
992G Wheel Loader Electrohydraulic System
Pressure Sensor (Implement Pilot Oil)
554 Forwarder and 574 Forwarder
Engine Starting with Jump Start Cables
D6M Track-Type Tractor
Fuses - Replace
928G Wheel Loader
Starting Below 0°C (32°F) with Thermal Starting Aid
992G Wheel Loader Electrohydraulic System
Pilot Control Actuator
928G Wheel Loader
Starting Above 0°C (32°F)
928G Wheel Loader
Product Identification Number, Serial Number and EU's CE Plate Locations
928G Wheel Loader
Model View Illustrations
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Specifications
D6M Track-Type Tractor
Engine Oil Level - Check
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Fuses - Replace
D6M Track-Type Tractor
Transmission Oil Level - Check
928G Wheel Loader
Shipping the Machine
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Circuit Breakers - Reset
928G Wheel Loader
Lifting and Tying Down the Machine
928G Wheel Loader
Towing the Machine
651E Wheel Tractor-Scraper
Directional Turn Signal and Hazard Flasher Control
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Transmission Oil Filter - Replace
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Hydraulic System Oil Filter - Replace
651E Wheel Tractor-Scraper
Heating and Air Conditioning Control