Directional Turn Signal and Hazard Flasher Control
`
928G Wheel Loader
[SEBU7015]
ELECTRICAL AND STARTING SYSTEM
LIGHTING GP
928G Wheel Loader
Directional Turn Signal and Hazard Flasher Control
Show/hide table
![]() | |
Illustration 1 | g00101735 |
Show/hide table
![]() | Directional Turn Signals - The directional turn signal lever is on the right side of the steering column. |
In order to activate the left turn signal, push the turn signal lever to position (1). An indicator light on the instrument panel will flash.
In order to activate the right turn signal, pull the turn signal lever to position (2). An indicator light on the instrument panel will flash.
Move the turn signal lever to the center position in order to deactivate either turn signal.
Show/hide table
![]() | |
Illustration 2 | g00102565 |
Show/hide table
![]() | Hazard Flashers (3) - Pull the turn signal lever upward in order to activate the hazard flashers. Both turn signal lights will flash. Push the turn signal lever downward in order to deactivate the hazard flashers. |
Information System:
D6M Track-Type Tractor
Engine Air Filter Secondary Element - Replace
651E Wheel Tractor-Scraper
Electronic Monitoring System (EMS)
966G and 972G Wheel Loaders
Tilt Control
928G Wheel Loader
Light Switches
928G Wheel Loader
Gauges
651E Wheel Tractor-Scraper
Engine Start Switch
988G Wheel Loader
Ride Control - If Equipped
966G and 972G Wheel Loaders
Steering Control
928G Wheel Loader
Service Brake Control
928G Wheel Loader
Thermal Starting Aid
924Gz Wheel Loader
Engine Start Switch
928G Wheel Loader
Battery Disconnect Switch
D6M Track-Type Tractor
Engine Air Filter Primary Element - Clean/Replace
924Gz Wheel Loader
Heating and Air Conditioning Control
928G Wheel Loader
Seat
966G and 972G Wheel Loaders
Display Modules (Caterpillar Monitoring System)
928G Wheel Loader
Model View Illustrations
928G Wheel Loader
Product Identification Number, Serial Number and EU's CE Plate Locations
928G Wheel Loader
Starting Above 0°C (32°F)
992G Wheel Loader Electrohydraulic System
Pilot Control Actuator
928G Wheel Loader
Starting Below 0°C (32°F) with Thermal Starting Aid
D6M Track-Type Tractor
Fuses - Replace
554 Forwarder and 574 Forwarder
Engine Starting with Jump Start Cables
992G Wheel Loader Electrohydraulic System
Pressure Sensor (Implement Pilot Oil)