966G and 972G Wheel Loaders Directional Turn Signal and Hazard Flasher Control - If Equipped Caterpillar


Directional Turn Signal and Hazard Flasher Control - If Equipped
`
966G and 972G Wheel Loaders [SEBU7035]
ELECTRICAL AND STARTING SYSTEM
LIGHTING GP
966G and 972G Wheel Loaders Directional Turn Signal and Hazard Flasher Control - If Equipped
966G and 972G Wheel Loaders Light Switches


Illustration 1g00597203
Conventional Steering


Illustration 2g00597204
Command Control Steering

A turn signal lever may be mounted on the steering column.

Directional Turn Signal (3) - To activate the left turn signal, push the turn signal lever forward to position (1). To activate the right turn signal, pull the turn signal lever rearward to position (2). Move the turn signal lever to the center position in order to deactivate either turn signal.

An indicator light on the front dash panel will flash when the turn signal is activated.



Illustration 3g00697962

Hazard Flasher - The hazard flasher is activated by this switch on the left side of the operator compartment. Push the bottom of the switch in order to activate the hazard flasher. Push the top of the switch in order to deactivate the hazard lights.

An indicator light on the front dash panel will flash when the hazard flasher is activated.