966G and 972G Wheel Loaders Engine Start Switch Caterpillar

Engine Start Switch

966G and 972G Wheel Loaders [SEBU7035]

966G and 972G Wheel Loaders Engine Air Filter Secondary Element - Replace

966G and 972G Wheel Loaders Directional Turn Signal and Hazard Flasher Control - If Equipped

ELECTRICAL AND STARTING SYSTEM

SWITCH GP

966G and 972G Wheel Loaders Engine Start Switch

966G and 972G Wheel Loaders Directional Turn Signal and Hazard Flasher Control - If Equipped

966G and 972G Wheel Loaders Light Switches

966G and 972G Wheel Loaders Battery Disconnect Switch

Show/hide table




Illustration 1	g00455464
Earlier Machines

Show/hide table




Illustration 2	g00482604
Later Machines

Show/hide table

OFF (1) - When you insert the engine start switch key and when you remove the engine start switch key, the engine start switch must be in the OFF position. To disconnect the power to the electrical circuits in the cab, turn the engine start switch to the OFF position. Also, turn the engine start switch to the OFF position in order to stop the engine.

Show/hide table

ON (2) - To activate the electrical circuits in the cab, turn the engine start switch key clockwise to the ON position.

Show/hide table

START (3) - To start the engine, turn the engine start switch clockwise to the START position. When the engine start switch key is released, the engine start switch will return to the ON position.

Note: If the engine fails to start, return the engine start switch to the OFF position. This must be done before you attempt to start the engine again.