After Starting Engine
`
D5M Track-Type Tractor
[SEBU6886]
ENGINE ARRANGEMENT
MISCELLANEOUS INFORMATION
561M Pipelayer
Engine Starting with Jump Start Cables
D5M Track-Type Tractor
After Starting Engine
D5M Track-Type Tractor
Changing Direction and Speed
D6M Track-Type Tractor
Product Identification Number, Serial Number and EU's CE Plate Locations
D5M Track-Type Tractor
Starting with Auxiliary Start Receptacle
Show/hide table
 | |
| Illustration 1 | g00101536 |
Show/hide table
| NOTICE |
|---|
Keep engine speed low until the engine oil pressure registers on the gauge or the engine oil indicator light goes out. If it does not register or the light go out within ten seconds, stop the engine and investigate the cause before starting again. Failure to do so, can cause engine damage. |
- Allow a cold engine to warm up at low idle for at least five minutes. Engage the attachment controls and disengage the attachment controls in order to help warm-up of the hydraulic components.
Cycle all of the controls in order to allow the warm oil to circulate through all of the cylinders and all of the lines.
When you run the engine at low idle in order to warm up the engine, observe the following recommendations.
- If the temperature is over 0°C (+32°F), idle the engine for approximately 15 minutes.
- If the temperature is below 0°C (+32°F), idle the engine for approximately 30 minutes or more.
- If the temperature is below -18°C (0°F), more time may be required in order to warm up the engine.
- If the hydraulics are sluggish, more time may be required in order to warm up the engine.
- If the temperature is over 0°C (+32°F), idle the engine for approximately 15 minutes.
- All fault lights should turn off. The fault alarm should turn off. If the fault lights do not turn off, stop the engine. Make any necessary repairs before you start the engine.
- Frequently look at the action light and the gauge display during operation.
Show/hide table
 | |
| Illustration 2 | g00101537 |
- Look at the hydraulic oil tank and the transmission oil levels. Maintain the oil levels to the "FULL" marks.
Information System:
D6M Track-Type Tractor
Starting Below 0°C (32°F)
561M Pipelayer
Engine Starting with Jump Start Cables
D6M Track-Type Tractor
Starting Above 0°C (32°F)
992G Wheel Loader and 854G Wheel Dozer Braking System
Parking Brake
D6M Track-Type Tractor
Bulldozer Blade Lift Control
992G Wheel Loader and 854G Wheel Dozer Braking System
Service Brakes
992G Wheel Loader
Capacities (Refill)
D5M Track-Type Tractor
Transmission Control
561M Pipelayer
Torque Converter
651E Wheel Tractor-Scraper
Safety Signs and Labels
D5M Track-Type Tractor
Light Switches
D5M Track-Type Tractor
Digital Display Window
D5M Track-Type Tractor
Changing Direction and Speed
D6M Track-Type Tractor
Lifting and Tying Down the Machine
D5M Track-Type Tractor
Towing the Machine
D6M Track-Type Tractor
Model View Illustrations
D6M Track-Type Tractor
Product Identification Number, Serial Number and EU's CE Plate Locations
D6M Track-Type Tractor
Starting with Auxiliary Start Receptacle
992G Wheel Loader and 854G Wheel Dozer Braking System
Piston Pump (Brake)
322B, 322B L, 325B and 325B L Excavators
Fire Prevention and Explosion Prevention
928G Wheel Loader
Crushing Prevention and Cutting Prevention
992G Wheel Loader Electrohydraulic System
Hydraulic Tank (Implement, Hydraulic Fan)
928G Wheel Loader
Equipment Lowering with Engine Stopped
924Gz Wheel Loader
General Hazard Information