D10R Track-Type Tractor Capacities (Refill) Caterpillar


Capacities (Refill)
`
1.1. Ecology Drains

Table 1
Approximate Refill Capacities 
Compartment or System  Liters  US gal  Imperial gallon 
Cooling System  132  34.9  29 
Fuel Tank  1109  293  244 
Engine Oil (includes filters)  68  18  15 
Power Train Oil  189  50  41.5 
Hydraulic Oil  108  28.5  23.8 
Final Drives (each)  23  6.1 
Recoil Spring Compartment  64  17  14.5 
Winch Sump  68  18  15 
Pivot Shaft  30.3  6.7 

Note: Run the engine for several minutes before you check the engine oil level on the dipstick.

Note: When you are operating on severe slopes, the quantity of oil in the transmission can be increased up to 10 percent. When you are operating with the increased oil quantity, prolonged operation in some machines can cause high transmission oil temperatures. After the work on the severe slopes has been completed, drain the excessive oil quantity from the transmission.

Ecology Drains

Table 2
Ecology Drain 
Location  Requirement 
Coolant  25.4 mm (1 inch) pipe with 1-11 1/2 NPTH thread 
Transmission  33.3 mm (1.31 inch)
pipe with 1 5/16 -12 UN - 2A thread 
Torque Converter  12.7 mm (.5 inch)
pipe with 1/2-14 NPTH thread 
Engine Oil  25.4 mm (1 inch) pipe with 1-11 1/2 NPTH thread 
Hydraulic Tank  12.7 mm (.5 inch)
pipe with 1/2-14 NPTH thread 
Bevel Gear Case  12.7 mm (.5 inch)
pipe with 1/2-14 NPTH thread