The seat belt is equipped with an automatic retractor lock. Pull out the belt. The retractor will lock if the belt is pulled or the belt is jerked.
The end of the seat belt is equipped with a comfort ride sleeve. This sleeve will allow limited movement by the operator.
 | |
| Illustration 1 | g00039110 |
Pull seat belt (1) out of the retractor in a continuous motion.
Fasten seat belt catch (2) into buckle (3). Make sure that the seat belt is placed low across the lap of the operator.
The retractor will adjust the belt length and the retractor will lock in place. The comfort ride sleeve will allow limited movement by the operator.
Release the Seat Belt
 | |
| Illustration 2 | g00039113 |
Push the release button on the buckle in order to release the seat belt. The seat belt will automatically retract into the retractor.
Extension of the Seat Belt
 |
When using retractable seat belts, do not use seat belt extensions, or personal injury or death can result. The retractor system may or may not lock up depending on the length of the extension and the size of the person. If the retractor does not lock up, the seat belt will not retain the person. |
 |
Do not put an extension on a retractable seat belt. AVSpare recommends using a seat belt that does not retract if a longer belt is needed.
Longer seat belts are available.
Consult your AVSpare dealer for longer seat belts.