D6R Track-Type Tractor Winch Filter and Magnetic Strainer - Replace/Clean Caterpillar

Show/hide table

Hot oil and components can cause personal injury. Do not allow hot oil or components to contact skin.

Illustration 1	g00040007

1. Remove the cover and the gasket.

Show/hide table



Illustration 2	g00040006

2. Remove the filter element housing with a wrench.

3. Remove the filter element from the filter element housing.

4. Clean the filter element housing with a clean cloth.

5. If the seal is damaged, replace the seal. Lubricate the seals with clean oil.

6. Install a new filter element into the filter element housing.

7. Tighten the filter element housing to a torque of27 ± 4 N·m (20 ± 3 lb ft).

8. Install the cover and the gasket.

Clean the Magnet and Clean the Strainer

Illustration 3	g00040008

1. Remove the cover, the magnet, and the strainer.

2. Clean these parts in a clean nonflammable solvent.

3. Install the strainer and the magnet.

4. Install the cover.