EPC Parts Catalogs

834B and 836 Landfill Compactor Coolant Conditioner Element - Replace Caterpillar


  1. Home
  2. Operation and Maintenance Manual
  3. #55757
Coolant Conditioner Element - Replace
`
834B and 836 Landfill Compactor [SEBU6696]
834B and 836 Landfill Compactor Circuit Breakers - Reset
834B and 836 Landfill Compactor Cab Air Filter - Clean/Replace
COOLING SYSTEM
COOLANT CONDITIONER GP
834B and 836 Landfill Compactor Coolant Conditioner Element - Replace
834B and 836 Landfill Compactor Cooling System Coolant Extender (ELC) - Add

Show/hide table
NOTICE

Make sure you read and understand the information in the topics Safety and Cooling System Specifications for all information pertaining to water, antifreeze and supplemental coolant additive requirements before you proceed with maintenance of the cooling system.

Show/hide table

Illustration 1g00038495

  1. Open the engine access cover that is on the right side of the machine.
    Show/hide table

    Illustration 2g00038511

    Coolant Conditioner Element for 834BWheel Tractors (7BR1-583 ) and 836Landfill Compactors (7FR1-241 )

  1. Turn inlet valve (1) and outlet valve (2) clockwise in order to close the inlet valve and the outlet valve.

  1. Remove coolant conditioner element (3). Discard the element.

  1. Clean the filter mounting base. Ensure that all of the old element seal is removed.

  1. Install a new coolant conditioner element. Consult your AVSpare dealer for the correct element to use on your machine.

  1. Coat the element seal with a thin coat of clean engine oil.

  1. Install the element. Turn the element until the seal contacts the base. Then, turn the element for an additional three quarter of a turn.

  1. Turn inlet valve (1) and outlet valve (2) counterclockwise in order to open the inlet valve and the outlet valve.

  1. Start the engine. Check the system for leaks. Allow the coolant level to stabilize.

  1. If necessary, add premixed coolant in order to bring the coolant within 13 mm (.5 inch) of the bottom of the filler pipe. Add premixed coolant in order to bring the coolant to the proper level on the sight glass, if equipped.

  1. Close the access cover.

Information System:

834B and 836 Landfill Compactor Circuit Breakers - Reset
834B and 836 Landfill Compactor V-Belts - Inspect/Adjust/Replace
834B and 836 Landfill Compactor Lift Control
834B and 836 Landfill Compactor Air Conditioner - Test
834B and 836 Landfill Compactor Transmission Direction and Speed Control
834B and 836 Landfill Compactor Parking Brake Control
834B and 836 Landfill Compactor Heating and Air Conditioning Control
834B and 836 Landfill Compactor Backup Alarm
834B and 836 Landfill Compactor Light Switches
966G and 972G Wheel Loaders Tire Inflation with Nitrogen
834B and 836 Landfill Compactor Parking Brake Manual Release
834B and 836 Landfill Compactor Gauges
834B and 836 Landfill Compactor Cab Air Filter - Clean/Replace
834B and 836 Landfill Compactor Differential and Final Drive Oil - Change
834B and 836 Landfill Compactor Ether Starting Aid Cylinder - Replace
834B and 836 Landfill Compactor Engine Oil (High Speed) and Oil Filter - Change - If Equipped
834B and 836 Landfill Compactor Fuel System - Prime
834B and 836 Landfill Compactor Fuel System Secondary Filter - Replace
834B and 836 Landfill Compactor Fuel Tank Cap and Strainer - Clean
834B and 836 Landfill Compactor Fuses - Replace
834B and 836 Landfill Compactor Steering Cylinder Bearings - Lubricate
834B and 836 Landfill Compactor Hydraulic System Oil - Change
834B and 836 Landfill Compactor Hydraulic System Oil Level - Check
834B and 836 Landfill Compactor Transmission Oil - Change