Gauges
`
834B and 836 Landfill Compactor
[SEBU6696]
834B and 836 Landfill Compactor
Electronic Monitoring System (EMS)
834B and 836 Landfill Compactor
Parking Brake Manual Release
OPERATOR STATION
PANEL GP
Show/hide table
 | |
| Illustration 1 | g00038737 |
These gauges are used to help the operator to monitor trends in temperatures or changes in temperatures. These gauges operate on a system that is separate from the Electronic Monitoring System (EMS). These gauges will not alert the operator when corrective action is necessary.
Show/hide table
| Hydraulic Oil Temperature (1) - This gauge indicates the temperature of the hydraulic oil. The normal operating range is the green area. If the needle reaches the red area, reduce the load on the system. If the needle stays in the red area, stop the machine and investigate the cause of the problem. Do not operate the machine until the cause of the problem has been corrected. |
Show/hide table
| Transmission Oil Temperature (2) - This gauge indicates the temperature of the transmission oil. The normal operating range is the green area. If the needle reaches the red area, reduce the load on the machine. If the needle stays in the red area, stop the machine and investigate the cause of the problem. Do not operate the machine until the cause of the problem has been corrected. |
Show/hide table
| Coolant Temperature (3) - This gauge indicates the temperature of the cooling system coolant. The normal operating range is the green area. If the needle reaches the red area, stop the engine immediately and investigate the cause of the problem. Do not operate the machine until the cause of the problem has been corrected. |
Show/hide table
 | |
| Illustration 2 | g00038663 |
Show/hide table
| Hourmeter - The hourmeter indicates the total operating hours of the engine. The hourmeter should be used to determine the service intervals for the machine. |
Information System:
834B and 836 Landfill Compactor
Electronic Monitoring System (EMS)
834B and 836 Landfill Compactor
Product Identification Number, Serial Number and EU's CE Plate Locations
834B and 836 Landfill Compactor
Model View Illustrations
515 Wheel Skidder and 525 Wheel Skidder
General Hazard Information
834B and 836 Landfill Compactor
Safety Signs and Labels
615C Series II Wheel Tractor-Scraper Hydraulic System
Elevator Speed Reducer
615C Series II Wheel Tractor-Scraper Hydraulic System
Elevator Frame
611 Wheel Tractor-Scraper Hydraulic System
Piston Pump (Axle Suspension)
611 and 615C Series II Wheel Tractor-Scrapers Steering System
Steering Control Valve
Installation Of 3Y6693 Regulator Used With 3Y6880 Conversion Kit{1400}
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND INSTALLING THE 4N8150 SPRING AND 3929208 PLUNGER IN THE ENGINE OIL FILTER BASE 4734860 ON CERTAIN AD30 UNDERGROUND ARTICULATED TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR APPLYING THE PROPER TIGHTENING TO THE MOUNTING BOLTS FOR THE HYSTAT MOTORS ON CERTAIN 926M, 930M, AND 938M SMALL WHEEL LOADERS
834B and 836 Landfill Compactor
Parking Brake Manual Release
966G and 972G Wheel Loaders
Tire Inflation with Nitrogen
834B and 836 Landfill Compactor
Light Switches
834B and 836 Landfill Compactor
Backup Alarm
834B and 836 Landfill Compactor
Heating and Air Conditioning Control
834B and 836 Landfill Compactor
Parking Brake Control
834B and 836 Landfill Compactor
Transmission Direction and Speed Control
834B and 836 Landfill Compactor
Air Conditioner - Test
834B and 836 Landfill Compactor
Lift Control
834B and 836 Landfill Compactor
V-Belts - Inspect/Adjust/Replace
834B and 836 Landfill Compactor
Circuit Breakers - Reset
834B and 836 Landfill Compactor
Coolant Conditioner Element - Replace