914G WHEEL LOADER HYDRAULIC QUICK COUPLER ATTACHMENT THIS MODULE INCLUDES Introduction Caterpillar


Introduction
`
1.1. Hydraulic Coupler

When the words "use again" are in the description, the specification given can be used to determine if a part can be used again. If the part is equal to or within the specification given, use the part again.

When the word "permissible" is in the description, the specification given is the "maximum or minimum" tolerance permitted before adjustment, repair and/or new parts are needed.

A comparison can be made between the measurements of a worn part and the specifications for a new part to find the amount of wear. A part that is worn can be safe to use if an estimate of the remainder of its service life is good. If a short service life is expected, replace the part.

------ WARNING! ------

Disconnect batteries before performance of all service work with the exception of performing voltage testing.

------WARNING!--------

------ WARNING! ------

At operating temperature, the hydraulic oil tank is hot and under pressure. Hot oil can cause burns. Remove the breather filter cap only when the engine is stopped and the breather filter cap is cool enough to touch. Slowly loosen the breather cap to release any pressure in the hydraulic tank. Be cautious of hot oil when any lines are disconnected in the hydraulic system.

------WARNING!--------

Hydraulic Coupler


Hydraulic Quick Coupler


Hydraulic Quick Coupler

Information System:

914G WHEEL LOADER HYDRAULIC QUICK COUPLER ATTACHMENT THIS MODULE INCLUDES General Hazard Information
HYDRAULIC BROOM FOR CATERPILLAR BACK Safety
HYDRAULIC OPERATED QUICK COUPLER FOR CATERPILLAR LOAD Hydraulic fluid
HYDRAULIC OPERATED QUICK COUPLER FOR CATERPILLAR LOAD Operating Techniques
HYDRAULIC OPERATED QUICK COUPLER FOR CATERPILLAR LOAD Using the manual
HYDRAULIC OPERATED QUICK COUPLER (WEDGE TYPE) FOR CATERPILLAR LOAD Maintenance
HYDRAULIC OPERATED QUICK COUPLER (WEDGE TYPE) FOR CATERPILLAR LOAD Operating Techniques
HYDRAULIC OPERATED QUICK COUPLER (WEDGE TYPE) FOR CATERPILLAR LOAD Using the manual
Installation Of 5G3257 And 5G4257 Rops Cab Arrangements{7325}
SUPPLEMENT FOR 936 WHEEL LOADERS CATERPILLAR BELGIUM Progressive Application Parking/Secondary Brake Control (Part of Brake Package attachment)
SUPPLEMENT FOR 950B WHEEL LOADERS (BELGIUM S.A. BUILT) Progressive Application Parking/Emergency Brake Control (Part of Brake Package attachment)
SUPPLEMENT FOR 920 ABD 930 WHEEL LOADERS Batteries (41J7796-Up and 79J7507-Up)
914G WHEEL LOADER HYDRAULIC QUICK COUPLER ATTACHMENT THIS MODULE INCLUDES Operation And Maintenance
914G WHEEL LOADER HYDRAULIC QUICK COUPLER ATTACHMENT THIS MODULE INCLUDES Specifications
INSTALLATION AND OPERATION LOAD SHARING MODULE Electrostatic Discharge Awareness
INSTALLATION AND OPERATION LOAD SHARING MODULE Chapter 2 - Installation
INSTALLATION AND OPERATION LOAD SHARING MODULE Chapter 3 - Setup and Calibration
INSTALLATION AND OPERATION LOAD SHARING MODULE Chapter 4 - Theory Of Operation
INSTALLATION AND OPERATION LOAD SHARING MODULE Appendix A. - LSM Control Specifications
INSTALLATION AND OPERATION LOAD SHARING MODULE Appendix B. - Guide for Handling and Protection of Electronic Controls, Printed Circuit Boards, & Modules
INSTALLATION AND OPERATION LOAD SHARING MODULE Appendix C. - EMI Control in Electronic Governing Systems
SERVICE MANUAL FOR PA WINCH MODELS WITH ELECTRONIC CONTROLS General Safety Recommendations
SERVICE MANUAL FOR PA WINCH MODELS WITH ELECTRONIC CONTROLS Model Description
SERVICE MANUAL FOR PA WINCH MODELS WITH ELECTRONIC CONTROLS Preventive Maintenance & Specifications