SUPPLEMENT FOR 950B WHEEL LOADERS (BELGIUM S.A. BUILT) Progressive Application Parking/Emergency Brake Control (Part of Brake Package attachment) Caterpillar


Progressive Application Parking/Emergency Brake Control (Part of Brake Package attachment)
`
1.1. Manual Release In Abnormal Conditions
2.1. Supplemental Steering Lights

To apply the brake, pull the control lever downwards and towards the operator. The brake is applied progressively with the downward movement of the lever.

To release the brake, push lever upwards and away from operator.

------ WARNING! ------

Applying the Parking/Emergency Brake does NOT return the transmission to Neutral if engaged or prevent engagement of the transmission from Neutral.

Do not leave the transmission engaged with the Parking/Emergency Brake applied and engine running. Release of the Parking/Emergency Brake will cause the loader to move.

------WARNING!--------

------ WARNING! ------

Loss of pressure in the service brake air system does not automatically apply the Parking/Emergency Brake. The Parking/Emergency Brake force is proportional to the position the lever is moved to and the speed of lever movement.

------WARNING!--------


NOTICE

Do not apply the Parking/Emergency Brake while the loader is moving except in an emergency. Using the Parking/Emergency Brake as a service brake will cause severe damage to the system.


Manual Release In Abnormal Conditions

1. Connect the anti-pivot link to hold the articulated loader frame rigid before working in the center pivot area.

------ WARNING! ------

Block the wheels securely so the vehicle cannot move.

------WARNING!--------

2. Strike the yoke assembly cam at the position shown until the retainer tabs are bent back and allow the cam to rotate and release the brake.
3. Have any necessary repairs made and reassemble the yoke assembly using 2 new 7V1940 Retainer before returning the loader to operation.
4. Return anti-pivot link to carry position.

Supplemental Steering Lights

These warning lights indicate malfunction of the steering circuits or the engine is stopped. The front warning light (main circuit) (1) should remain OFF whenever the engine is running. The rear warning light (auxiliary circuit) (2) should remain OFF whenever the loader is moving in excess of 3 km/hour (2 m.p.h.).

Information System:

SUPPLEMENT FOR 920 ABD 930 WHEEL LOADERS Batteries (41J7796-Up and 79J7507-Up)
PSP FOR INSTALLING A NEW BRAKE PISTON TO PROVIDE IMPROVED BRAKE DISC SERVICE LIFE ON CERTAIN 966F AND 970F LOADERS - COS A LETTER NO. 5 - PS0778 - MAILED COSA
PSP FOR INSTALLING NEW BRAKE PISTON SEALS ON CERTAIN 950F, 966F AND 970F WHEEL LOADERS - COSA LETTER NO. 4 - PS0781 - MAI LED COSA - REVISED 02/95
PRIORITY - INSTALL A BRACKET TO SUPPORT THE TRANSMISSION DIPSTICK TUBE AT THE TRANSFER GEAR HOUSING ON CERTAIN 966F II AND 970F WHEEL LOADERS - COSA LETTER NO. 6 - PI3668 - MAILED COSA
PARTS STOCK ACTION NEEDED - PSP FOR UPDATING OR REPLACING THE ENGINE ON 950F WHEEL LOADERS - COSA LETTER NO. 4.1 - PS8016 - MAI LED COSA
Product Improvement Program To Replace The Transmission Shifter Handle And The Electronic Control Box For Autoshift On 936F Wheel Loaders
PSP TO REPLACE THE 9X0377 TEMPERATURE SENSOR WITH THE IMPROVED 3E5370 SENSOR ON 950F AND 966E WHEEL LOADERS - COSA LETTER NO. 3 - PS0624 - MAILED COSA
PSP TO REPLACE THE TRANSMISSION MOUNTS ON 966F WHEEL LOADERS - COSA LETTER NO. 2 - PS4828 - MAILED COSA
PSP TO REPLACE THE CMS BARGRAPH (LCD) PANEL WITH A VACUUM FLUORESCENT DISPLY (VFD) PANEL ON 950F, 966F, AND 980F WHEEL LOA DERS - COSA LETTER NO. 1 - PS0623 - MAILED COSA
PSP FOR REPLACING THE REAR AXLE DRIVE SHAFT YOKES ON CERTAIN 966F WHEEL LOADERS - COSA LETTER NO. 6 - PS4717 - MAILED COSA
PSP FOR CHANGING PISTON RETAINING WASHER ON CERTAIN D5H ANGLE CYLINDERS - COSA LETTER NO. 5 - PS4713 - MAILED COSA
THE DRIVE SHAFT YOKES ON THE REAR AXLES MAY FAIL ON CERTAIN 950F WHEEL LOADERS - COSA LETTER NO. 4 - PI3560 - MAILED COSA
SUPPLEMENT FOR 936 WHEEL LOADERS CATERPILLAR BELGIUM Progressive Application Parking/Secondary Brake Control (Part of Brake Package attachment)
Installation Of 5G3257 And 5G4257 Rops Cab Arrangements{7325}
HYDRAULIC OPERATED QUICK COUPLER (WEDGE TYPE) FOR CATERPILLAR LOAD Using the manual
HYDRAULIC OPERATED QUICK COUPLER (WEDGE TYPE) FOR CATERPILLAR LOAD Operating Techniques
HYDRAULIC OPERATED QUICK COUPLER (WEDGE TYPE) FOR CATERPILLAR LOAD Maintenance
HYDRAULIC OPERATED QUICK COUPLER FOR CATERPILLAR LOAD Using the manual
HYDRAULIC OPERATED QUICK COUPLER FOR CATERPILLAR LOAD Operating Techniques
HYDRAULIC OPERATED QUICK COUPLER FOR CATERPILLAR LOAD Hydraulic fluid
HYDRAULIC BROOM FOR CATERPILLAR BACK Safety
914G WHEEL LOADER HYDRAULIC QUICK COUPLER ATTACHMENT THIS MODULE INCLUDES General Hazard Information
914G WHEEL LOADER HYDRAULIC QUICK COUPLER ATTACHMENT THIS MODULE INCLUDES Introduction
914G WHEEL LOADER HYDRAULIC QUICK COUPLER ATTACHMENT THIS MODULE INCLUDES Operation And Maintenance