928G WHEEL LOADER HYDRAULIC QUICK COUPLER ATTACHMENT THIS MODULE INCLUDES Introduction Caterpillar


Introduction
`
1.1. Hydraulic Coupler

When the words "use again" are in the description, the specification given can be used to determine if a part can be used again. If the part is equal to or within the specification given, use the part again.

When the word "permissible" is in the description, the specification given is the "maximum or minimum" tolerance permitted before adjustment, repair and/or new parts are needed.

A comparison can be made between the measurements of a worn part and the specifications for a new part to find the amount of wear. A part that is worn can be safe to use if an estimate of the remainder of its service life is good. If a short service life is expected, replace the part.

------ WARNING! ------

Disconnect batteries before performance of all service work with the exception of performing voltage testing.

------WARNING!--------

------ WARNING! ------

At operating temperature, the hydraulic oil tank is hot and under pressure. Hot oil can cause burns. Remove the breather filter cap only when the engine is stopped and the breather filter cap is cool enough to touch. Slowly loosen the breather cap to release any pressure in the hydraulic tank. Be cautious of hot oil when any lines are disconnected in the hydraulic system.

------WARNING!--------

Hydraulic Coupler


Hydraulic Quick Coupler


Hydraulic Quick Coupler


Hydraulic Quick Coupler

Information System:

928G WHEEL LOADER HYDRAULIC QUICK COUPLER ATTACHMENT THIS MODULE INCLUDES General Hazard Information
992B WHEEL LOADER Tire Inflation Information
992B WHEEL LOADER Operating Techniques
992B WHEEL LOADER Operating Adjustments
992B WHEEL LOADER Driving The Loader
992B WHEEL LOADER Starting The Engine
992B WHEEL LOADER Before Starting
992B WHEEL LOADER Towing The Loader
992B WHEEL LOADER Safety
657 TRACTOR-SCRAPER Transporting Hints
657 TRACTOR-SCRAPER Operating Techniques
657 TRACTOR-SCRAPER Moving The Tractor-Scraper
928G WHEEL LOADER HYDRAULIC QUICK COUPLER ATTACHMENT THIS MODULE INCLUDES Operation And Maintenance
928G WHEEL LOADER HYDRAULIC QUICK COUPLER ATTACHMENT THIS MODULE INCLUDES Specifications
Analyzing Cylinder Condition By Measuring Air Flow{0651, 1000}
THE SPHERICAL THRUST WASHER IN THE DIFFERENTIALS MAY FAIL ON CERTAIN 966F WHEEL LOADERS - COSA LETTER NO. 3 - PI3555 - MAI LED COSA
THE DRIVE SHAFT YOKES ON THE REAR AXLES MAY FAIL ON CERTAIN 950F WHEEL LOADERS - COSA LETTER NO. 4 - PI3560 - MAILED COSA
PSP FOR CHANGING PISTON RETAINING WASHER ON CERTAIN D5H ANGLE CYLINDERS - COSA LETTER NO. 5 - PS4713 - MAILED COSA
PSP FOR REPLACING THE REAR AXLE DRIVE SHAFT YOKES ON CERTAIN 966F WHEEL LOADERS - COSA LETTER NO. 6 - PS4717 - MAILED COSA
PSP TO REPLACE THE CMS BARGRAPH (LCD) PANEL WITH A VACUUM FLUORESCENT DISPLY (VFD) PANEL ON 950F, 966F, AND 980F WHEEL LOA DERS - COSA LETTER NO. 1 - PS0623 - MAILED COSA
PSP TO REPLACE THE TRANSMISSION MOUNTS ON 966F WHEEL LOADERS - COSA LETTER NO. 2 - PS4828 - MAILED COSA
PSP TO REPLACE THE 9X0377 TEMPERATURE SENSOR WITH THE IMPROVED 3E5370 SENSOR ON 950F AND 966E WHEEL LOADERS - COSA LETTER NO. 3 - PS0624 - MAILED COSA
Product Improvement Program To Replace The Transmission Shifter Handle And The Electronic Control Box For Autoshift On 936F Wheel Loaders
PARTS STOCK ACTION NEEDED - PSP FOR UPDATING OR REPLACING THE ENGINE ON 950F WHEEL LOADERS - COSA LETTER NO. 4.1 - PS8016 - MAI LED COSA