Declaration of Conformity
`
(Custom) 367-7349 and Quick Coupler For Wheel Loaders
[GEBU0024]
(Custom) 367-7349 and Quick Coupler For Wheel Loaders
Daily Inspection
(Custom) 367-7349 and Quick Coupler For Wheel Loaders
Safety Messages
BASIC ENGINE
(Custom) 367-7349 and Quick Coupler For Wheel Loaders
Declaration of Conformity
Show/hide table
| An EC Declaration of Conformity document was provided with the machine if it was manufactured to comply with specific requirements for the European Union. In order to determine the details of the applicable Directives, review the complete EC Declaration of Conformity provided with the machine. The extract shown below from an EC Declaration of Conformity for machines that are declared compliant to 2006/42/EC applies only to those machines originally CE marked by the manufacturer listed and which have not since been modified. | ||||||
| EC DECLARATION OF CONFORMITY OF MACHINERY | ||||||
| Manufacturer:
AVSpare Work Tools B.V. Sigarenmakerstraat 9 NL-5232 BJ 's-Hertogenbosch, The Netherlands |
||||||
| Person authorized to compile the Technical File and to communicate relevant part (s) of the Technical File to the Authorities of European Union Member States on request: | ||||||
| Standards & Regulations Manager, AVSpare France S.A.S 40,
Avenue Leon-Blum, B.P. 55, 38041 Grenoble Cedex 9, France |
||||||
| I, the undersigned, _________, hereby certify that the construction equipment specified hereunder | ||||||
| Description: | Generic Denomination: | Earth-moving Equipment | ||||
| Function: | Quick Coupler | |||||
| Model/Type: | Quick Coupler (Dedicated Wedge Lock) | |||||
| Serial Number: | ||||||
| Commercial Name: | AVSpare Inc.
|
|||||
| Fulfills all the relevant provisions of the following Directives | ||||||
| Directives | Notified Body | Document No. | ||||
| 2006/42/EC | N/A | |||||
| Done at: | Signature | |||||
| Date: | Name/Position | |||||
| Note: The above information was correct as of November 2009, but may be subject to change, please refer to the individual declaration of conformity issued with the machine for exact details. | ||||||
Information System:
3500B and 3500C Marine Engines
Turbocharger
2009/09/30
A New Steering Filter Cover is Now Used {4304, 5068}
Frozen Water Damages the Radiator Guard{7155}
C27 and C32 Engines for Caterpillar Built Machines
Component Location
2009/09/30
Water Pump Operation {1361, 7555}
2009/09/30
Water Pump Operation {1361, 7555}
AD30 Underground Articulated Truck
Additional Messages
2010/01/22
Improved Track Rollers Are Now Used On the D10T {4180}
2009/10/29
Improved Gaskets for the Oil Filter Base Are Now Used on Certain Engines {1306, 1308, 7555}
2009/09/21
A Guard For the Pivot Shaft Seal Is Now Used On the D11T {4151}
953D, 963D and 973D Track-Type Loaders Monitoring System
Electrical Connector - Inspect
2009/09/28
Replacement Of The Gasket For The Rear Transmission Cover {3030, 7555}
3500B and 3500C Auxiliary Engines, Generator Set Engines, and Generator Sets
Plate Locations and Film Locations
988H Wheel Loader Electrohydraulic System
System Schematic
Procedure To Increase The Serviceability Of The Air Cleaner On D7G2 Machines That Are Equipped With A 273-9225 Engine Enclosure Group Or A 291-5668 Engine Enclosure Group {1051}
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems
Lift Cylinder - Remove and Install
986H Wheel Loader
Camera - If Equipped
Orientation of the 285-4106 Valve Cover Seal and the 217-5701 Bulk Seal {1107}
2009/09/30
New AccuGrade Software Version 11.10-B is Now Available {7220}
(Custom) 356-2124 Fusion Pallet Fork
Declaration of Conformity
A System Malfunction on the Blade Float on Certain Track-Type Tractor Differential Steering{5057}
930G Wheel Loader Machine Systems
Piston Pump (Steering, Implement, Pilot) - Disassemble
930G Wheel Loader Machine Systems
Piston Pump (Steering, Implement, Pilot) - Assemble
Installation Procedure for 352-8456 Lines Gp {5057}