| |
| Illustration 1 | g01967256 |
| |
| Illustration 2 | g01967257 |
The basic machine specifications are listed below.
| D7R Track-Type Tractor | |
| Weight without Implements | |
| Weight with 7SU Bulldozer | |
| Weight with 7SU Bulldozer and Ripper | |
| Maximum Overall Height (A) | |
| Maximum Overall Length (B)(1) | |
| Maximum Overall Width (C)(2) | |
| (1) | This length includes the blade and the ripper. |
| (2) | This width is measured across the widest blade. |
| D7R LGP Track-Type Tractor | |
| Weight without Implements | |
| Weight with 7S Bulldozer | |
| Maximum Overall Height (A) | |
| Maximum Overall Length (B)(1) | |
| Maximum Overall Width (C)(2) | |
| (1) | This length includes the blade and the ripper. |
| (2) | This width is measured across the widest blade. |
| D7R XR Track-Type Tractor | |
| Weight without Implements | |
| Weight with 7SU Bulldozer | |
| Weight with 7SU Bulldozer and Ripper | |
| Maximum Overall Height (A) | |
| Maximum Overall Length (B)(1) | |
| Maximum Overall Width (C)(2) | |
| (1) | This length includes the blade and the ripper. |
| (2) | This width is measured across the widest blade. |
This Track-Type Tractor is a machine for high production earthmoving that is described by "ISO 6165:2001". The Track-Type Tractor is classified as a Tractor-dozer. The tractor-dozer is a self-propelled crawler with equipment such as a dozing attachment which cuts, moves and grades material through forward motion of the machine or a mounted attachment that is used to exert a push or a pull force such as a ripper or towing winch. Additional applications include pushing scrapers during loading and pulling towed equipment when the drawbar is used.
Application/Configuration Restrictions
Maximum approved Operating Weight is
Maximum drawbar pull
Maximum vertical drawbar load
The maximum line pull for the winch is
The maximum slope that has the proper lubrication is 100 percent or 45 degrees.
The capability of the brake is equal to the ROPS capability under a 45 degree slope.
Use the machine only in environments that are not explosive with gases.
Special attachments and operating instructions are required for waste handling applications and other custom configurations.