Ensure that all safety information, warnings, and instructions are read and understood before any operation or any maintenance procedures are performed.
The user is responsible for the performance of maintenance, including all adjustments, the use of proper lubricants, fluids, filters, and the replacement of components due to normal wear and aging. Failure to adhere to proper maintenance intervals and procedures may result in diminished performance of the product and/or accelerated wear of components.
Use mileage, fuel consumption, service hours, or calendar time, WHICH EVER OCCURS FIRST, in order to determine the maintenance intervals. Products that operate in severe operating conditions may require more frequent maintenance.
Note: Before each consecutive interval is performed, all maintenance from the previous interval must be performed.
When Required
Cutting Edges and End Bits - Inspect/ReplaceEjector Block and Plate - Inspect/Replace
Ejector Block and Plate - Inspect/Replace
Ejector Carrier Rollers - Check/Adjust
Every 50 Service Hours or Weekly
Apron Bearing - LubricateAxle Bearings - Lubricate
Bowl Cylinder Bearings - Lubricate
Bowl Cylinder Bearings - Lubricate
Ejector Cylinder Bearing - Lubricate
Towing Hitch - Lubricate
Every 500 Service Hours or 3 Months
Wheel Bearing Oil Sample - ObtainWheel Bearing Oil Sample - Obtain
Every 2000 Service Hours or 1 Year
Brake Lining - InspectWheel Bearing Oil - Change
Wheel Bearing Oil - Change