D7E Track-Type Tractor Winch Oil and Breather - Change/Clean - If Equipped Caterpillar


Winch Oil and Breather - Change/Clean - If Equipped
`
D7E Track-Type Tractor [SEBU9127]
WORK TOOLS
WINCH GP
D6T Track-Type Tractor Winch Wire Rope - Install - If Equipped
D7E Track-Type Tractor Winch Oil and Breather - Change/Clean - If Equipped
1.1. PA90 Winch

------ WARNING! ------

Hot oil and components can cause personal injury.

Do not allow hot oil or components to contact skin.


PA90 Winch



Illustration 1g00544425

  1. Remove the oil filler plug.


    Illustration 2g00550902

  2. Remove the drain plug on the bottom of the winch. Allow the oil to drain into a suitable container.

  3. Inspect the plug seal. If necessary, replace the plug seal.

  4. Clean the drain plug and install the drain plug.


    Illustration 3g00530827

  5. Remove the oil level plug.

  6. Fill the oil compartment until oil is visible at the bottom of the opening for the oil level plug. See Operation and Maintenance Manual, "Capacities (Refill)".


    Illustration 4g00544425

  7. Clean the vent plug (breather) that is in the filler plug. Use a clean nonflammable solvent.

  8. Clean the filler plug and install the filler plug.

  9. Run the engine at low idle. Maintain the oil level so that the oil level is visible at the bottom of the opening for the oil level plug.

  10. Install the oil check plug.

Information System:

988G Wheel Loader Electrohydraulic System MID 082 - CID 0490 - FMI 04
988G Wheel Loader Electrohydraulic System MID 082 - CID 0490 - FMI 03
988G Wheel Loader Electrohydraulic System MID 082 - CID 0353 - FMI 04
988G Wheel Loader Electrohydraulic System MID 082 - CID 0352 - FMI 04
988G Wheel Loader Electrohydraulic System MID 082 - CID 0351 - FMI 02
988G Wheel Loader Electrohydraulic System MID 082 - CID 0296 - FMI 12
988G Wheel Loader Electrohydraulic System MID 082 - CID 0296 - FMI 09
D7E Track-Type Tractor Power Train Systems Track
C9.3 Tier 4 Final Engines Electronic Control System Components
C13, C15, and C18 Tier 4 Interim Engines ARD Fuel Supply - Test
C11 and C13 Engines for Caterpillar Built Machines Compression Brake Lash - Adjust
D7E Track-Type Tractor Machine Systems Piston Pump (Steering) - Remove and Install
992K Wheel Loader Electrohydraulic System MID 082 - CID 0350 - FMI 03
992K Wheel Loader Electrohydraulic System MID 082 - CID 0350 - FMI 04
992K Wheel Loader Electrohydraulic System MID 082 - CID 0351 - FMI 03
854G and 854K Wheel Dozers and 992G, 992K and 994F Wheel Loaders VIMSTM MID 049 - CID 0262 - FMI 03
854G and 854K Wheel Dozers and 992G, 992K and 994F Wheel Loaders VIMSTM MID 049 - CID 0262 - FMI 04
992K Wheel Loader Electrohydraulic System MID 082 - CID 0351 - FMI 04
854G and 854K Wheel Dozers and 992G, 992K and 994F Wheel Loaders VIMSTM MID 049 - CID 0290 - FMI 03
992K Wheel Loader Electrohydraulic System MID 082 - CID 0800 - FMI 14
992K Wheel Loader Electrohydraulic System MID 082 - CID 0967 - FMI 09
992K Wheel Loader Electrohydraulic System MID 082 - CID 0967 - FMI 14
992K Wheel Loader Electrohydraulic System MID 082 - CID 1571 - FMI 03
D11R Track-Type Tractor C32 Engine Retrofit Supplement Engine Mounts and Equalizer Bar - Inspect