Automatic Lubrication Grease Tank - Fill - If Equipped
`
D11T Track-Type Tractor
[SEBU8135]
D11T Track-Type Tractor
Lifting and Tying Down the Machine
D11T Track-Type Tractor
Hydraulic System Oil Filters - Replace
FRAME AND BODY
LUBRICATION GP
D11T Track-Type Tractor
Automatic Lubrication Grease Tank - Fill - If Equipped
1.1. Reservoir Location
2.2. Procedure for Refilling Reservoir
3.3. Location for Ground Level Fill
4.3. Filling the Reservoir
5.2. Location for Lubricating
6.2. Recommended Lubricant
Show/hide table
| |
| Illustration 1 | g01961437 |
The grease reservoir (1) for the automatic lubrication system is located on the left side of the machine.
Procedure for Refilling Reservoir
Location for Ground Level Fill
Show/hide table
| |
| Illustration 2 | g01962286 |
The coupling on the filler assembly is located on the left hand ripper cylinder.
- Ensure that the hose is filled with grease in order to prevent air from being pumped into the reservoir.
- Clean the coupling for filling and the coupling of the hose for filling.
- Attach the hose for filling to the coupling for refilling. Refill the reservoir to the maximum level. The air is allowed to bleed off during the filling of the reservoir.
- Disconnect the hose for filling and clean both couplings.
Show/hide table
| |
| Illustration 3 | g01961438 |
|
(2) ( 3) Lift cylinder yoke, left and right pivot bearings (two locations on each side)
(4) Ripper tilt cylinder, left and right frame pivot bearings (5) Ripper lift cylinder, left and right frame pivot bearings (6) Ripper frame, left and right pivot bearings (7) Ripper lift cylinder, left and right pivot bearings (8) Beam/Carriage, left and right pivot bearings (9) Ripper tilt cylinder, left and right pivot bearings | |
Table 1 lists the recommended lubricant that is used for the automatic lubrication system.
Show/hide table
| Recommended Lubrication for the Automated Lubrication System (1) | ||||||
| Grease | NLGI | °C | °F | |||
| AVSpare Autolube | 1 | -18 | +29 | 0 | +85 | |
| AVSpare Autolube | 2 | -1 | +41 | +30 | +105 | |
| AVSpare Autolube | 0 | -29 | +10 | -20 | +50 | |
| AVSpare Arctic Platinum | 000 | -59 | +4 | -75 | +40 | |
| AVSpare Desert Gold | 2 | +4 | +66 | +40 | +150 | |
Show/hide table
| (1) | In order to use a non-AVSpare lubricant, the supplier must certify that the lubricant is compatible with AVSpare's grease. Otherwise, each pin joint should be fully flushed with the new lubricant in order to entirely remove the AVSpare lubricant. Failure to meet this requirement may lead to failure of a pin joint due to premature breakdown of the lubricant. |
Information System:
Diagnostic Process for Fuel Rail Pressure Sensor{1718}
2011/05/31
Correction to Operation and Maintenance Manual , "Braking System - Test" {4250, 4251, 4267}
D7E Track-Type Tractor Power Train Systems
Steering Hesitates
D7E Track-Type Tractor Power Train Systems
Backup Alarm Does Not Function
D7E Track-Type Tractor Hydraulic, HVAC, and Electrical Systems
Fuel Tank Underfills (Fast Fill Fuel)
D7E Track-Type Tractor Hydraulic, HVAC, and Electrical Systems
Fueling Nozzle Shuts Off Prematurely (Fast Fill Fuel)
D11T Track-Type Tractor
Lifting and Tying Down the Machine
C13, C15, and C18 Tier 4 Interim Engines
NRS Exhaust Gas Temperature Is High
D11T Track-Type Tractor
Mirror - If Equipped
C4.4 Industrial Engine
Fuel Related Components in Cold Weather
AD30 Underground Articulated Truck
Starting the Engine
D7E Track-Type Tractor Power Train Systems
Steering Does Not Function
D7E Track-Type Tractor Power Train Systems
Front Idler
928HZ Wheel Loader - 344-7157 Pallet Fork (Custom Product)
Pallet Fork - Inspect
928HZ Wheel Loader - 344-7157 Pallet Fork (Custom Product)
Work Tool Installation and Removal
2011/02/18
The Check Valve Group Has Been Improved on Certain Wheel Tractor-Scrapers {5057, 5067}
928HZ Wheel Loader - 344-7157 Pallet Fork (Custom Product)
Rated Load
Rework Procedure To Relocate the Cab Pressurizer{7311, 7342}
2009/08/31
Hydraulic Oil Lines Groups for the Power Train Have Been Updated on Certain Wheel Tractor-Scrapers {3016, 3177}
2009/09/07
New Shims are Available for Certain 630 Wheel Tractor-Scrapers {1152, 1153, 1154}
2009/08/31
New CapSure Tip Assemblies Are Now Available for J800 Adapters {6805}
D7E Track-Type Tractor
Engine Starting with Auxiliary Start Receptacle - If Equipped
621G, 623G and 627G Wheel Tractor-Scrapers Machine Systems
System Pressure - Release
Procedure to Rework the Latches for the Rear Access Egress System RAES on the 993K Wheel Loaders{0679, 7011, 7256, 7273, 7277}