D9T Track-Type Tractor Battery Disconnect Switch Caterpillar


Battery Disconnect Switch
`
D9T Track-Type Tractor [SEBU7765]
ELECTRICAL AND STARTING SYSTEM
SWITCH GP
D9T Track-Type Tractor Battery Disconnect Switch
1.1. Battery Disconnect Switch


Illustration 1g01954559
(1) Battery disconnect switch

The battery disconnect switch is on the left side of the machine next to the battery compartment.



Illustration 2g00406959

Battery Disconnect Switch

ON - To activate the electrical system, insert the disconnect switch key and turn the battery disconnect switch clockwise. The battery disconnect switch must be turned to the ON position before you start the engine.

OFF - To deactivate the electrical system, turn the battery disconnect switch counterclockwise to the OFF position.

The battery disconnect switch operates differently than the engine start switch. When the battery disconnect switch is in the OFF position, the electrical system is disabled. When the engine start switch is turned to the OFF position and the battery disconnect switch is turned to the ON position, the battery remains connected to the entire electrical system.

Turn the battery disconnect switch to the OFF position and remove the disconnect switch key when you service the electrical system or other components on the machine.

Turn the battery disconnect switch to the OFF position and remove the disconnect switch key if you do not operate the machine for an extended period of a month or more. This will prevent drainage of the battery.


NOTICE

Never move the battery disconnect switch to the OFF position while the engine is operating. Serious damage to the electrical system could result.


Information System:

2011/01/06 Improvements to the Fuel Sender Group {1273, 1408, 6201, 7481, 7857}
953D Track-Type Loader Declaration of Conformity
TS180, TS185, TS220 and TS225 Towed Scrapers Declaration of Conformity
953D, 963D and 973D Track-Type Loaders Hydraulic System Pressure Is High
D7E Track-Type Tractor Hydraulic, HVAC, and Electrical Systems Implement Cycle Time Is Slow for All Implements
613G Wheel Tractor-Scraper Maintenance Interval Schedule
627G Wheel Tractor-Scraper Maintenance Interval Schedule
621G Wheel Tractor-Scraper Maintenance Interval Schedule
2009/07/27 New Air Lines and a New Air Motor Are Now Used to Improve the Capability of the Cold Start {1450, 1451, 1462, 1466}
2009/09/28 New Software Released For AccuGrade Office {5267, 7220}
D7E Track-Type Tractor Hydraulic, HVAC, and Electrical Systems Implement Hydraulic Force Is Low
2009/07/27 Improved Procedure for the Retention of the Identification Film for the Roll Over Protective Structure (ROPS) and Falling Object Protective Structure (FOPS) {7323, 7325, 7405, 7557}
D7E Track-Type Tractor Hydraulic, HVAC, and Electrical Systems Hydraulic Cylinder Collapse - The Lift Cylinder Will Collapse When The Control Is In The Raised Position
D7E Track-Type Tractor Hydraulic, HVAC, and Electrical Systems Implement Does Not Raise
Procedure to Install Improved Brake Oil Cooler Tubes{1380}
Procedure To Install New Heat Shields{1067, 1073}
950H Wheel Loader, 962H Wheel Loader and IT62H Integrated Toolcarrier Electrohydraulic System Piston Pump (Implement) (Pilot)
C13, C15, and C18 Tier 4 Final Engines Cylinder Head Valves
2010/12/23 Introduction of Improved Roading Lights for Medium Wheel Loaders {1429}
950H Wheel Loader, 962H Wheel Loader and IT62H Integrated Toolcarrier Electrohydraulic System Relief Valve (Line)
C15 and C18 Engines for Caterpillar Built Machines Fuel Transfer Pump
D6T Track-Type Tractor Systems Piston Pump (Steering) - Test and Adjust
2009/08/24 An Improved Lubrication Pump Is Available for Articulated Trucks and Wheel Loaders {7516, 7540}
2009/09/28 Improved Pivot Shafts Are Now Used {4153}