953D Track-Type Loader Declaration of Conformity Caterpillar


Declaration of Conformity
`

Table 1
An EC Declaration of Conformity document was provided with the machine if it was manufactured to comply with specific requirements for the European Union. In order to determine the details of the applicable Directives, review the complete EC Declaration of Conformity provided with the machine. The extract shown below from an EC Declaration of Conformity for machines that are declared compliant to "2006/42/EC" applies only to those machines originally "CE" marked by the manufacturer listed and which have not since been modified. 
 
EC DECLARATION OF CONFORMITY OF MACHINERY 
 
Manufacturer: AVSpare Inc., 100 N.E. Adams Street, Peoria, Illinois 61629, USA 
Person authorized to compile the Technical File and to communicate relevant part (s) of the Technical File to the Authorities of European Union Member States on request: 
  Standards & Regulations Manager,AVSpare France S.A.S 40,
Avenue Leon-Blum, B.P. 55, 38041 Grenoble Cedex 9, France 
I, the undersigned, _________, hereby certify that the construction equipment specified hereunder 
Description:  Generic Denomination:  Earth - moving Equipment   
  Function:  Steel Tracked Loader     
  Model/Type:  953D     
  Serial Number:       
  Commercial Name:  AVSpare     
Fulfils all the relevant provisions of the following Directives   
             
  Directives  Notified Body  Document No.   
  2006/42/EC  ....N/A.....     
  2000/14/EC amended by 2005/88/EC, Note (1)   LNE0071, Note (2)     
  2004/108/EC   ....N/A.....     
             
Note (1)  Annex -_____ Guaranteed Sound Power Level -_____dB (A)
Representative Equipment Type Sound Power Level - _____dB (A)
Engine Power per ____-____ kW Rated engine speed - _____ rpm
Technical Documentation accessible through person listed above authorized to compile the Technical File 
 
Note (2)  Laboratoire National, de Metrologie it d'Essais, Rue Gaston Boissier, 1, 75724 Paris Cedex 15, France   
     
Done at:      Signature     
Date:      Name/Position     
             
Note: The above information was correct as of July, 2009, but may be subject to change, please refer to the individual declaration of conformity issued with the machine for exact details. 

Information System:

TS180, TS185, TS220 and TS225 Towed Scrapers Declaration of Conformity
953D, 963D and 973D Track-Type Loaders Hydraulic System Pressure Is High
D7E Track-Type Tractor Hydraulic, HVAC, and Electrical Systems Implement Cycle Time Is Slow for All Implements
613G Wheel Tractor-Scraper Maintenance Interval Schedule
627G Wheel Tractor-Scraper Maintenance Interval Schedule
621G Wheel Tractor-Scraper Maintenance Interval Schedule
2009/07/27 New Air Lines and a New Air Motor Are Now Used to Improve the Capability of the Cold Start {1450, 1451, 1462, 1466}
2009/09/28 New Software Released For AccuGrade Office {5267, 7220}
D7E Track-Type Tractor Hydraulic, HVAC, and Electrical Systems Implement Hydraulic Force Is Low
2009/07/27 Improved Procedure for the Retention of the Identification Film for the Roll Over Protective Structure (ROPS) and Falling Object Protective Structure (FOPS) {7323, 7325, 7405, 7557}
2010/01/06 A New Lip Seal for the Final Drive Is Now Used {4050, 4052}
2012/04/09 Improved Friction Disc and Software for the Torque Converter Impeller Clutch on 988H Wheel Loaders {3101, 7610, 7620}
2011/01/06 Improvements to the Fuel Sender Group {1273, 1408, 6201, 7481, 7857}
D9T Track-Type Tractor Battery Disconnect Switch
D7E Track-Type Tractor Hydraulic, HVAC, and Electrical Systems Hydraulic Cylinder Collapse - The Lift Cylinder Will Collapse When The Control Is In The Raised Position
D7E Track-Type Tractor Hydraulic, HVAC, and Electrical Systems Implement Does Not Raise
Procedure to Install Improved Brake Oil Cooler Tubes{1380}
Procedure To Install New Heat Shields{1067, 1073}
950H Wheel Loader, 962H Wheel Loader and IT62H Integrated Toolcarrier Electrohydraulic System Piston Pump (Implement) (Pilot)
C13, C15, and C18 Tier 4 Final Engines Cylinder Head Valves
2010/12/23 Introduction of Improved Roading Lights for Medium Wheel Loaders {1429}
950H Wheel Loader, 962H Wheel Loader and IT62H Integrated Toolcarrier Electrohydraulic System Relief Valve (Line)
C15 and C18 Engines for Caterpillar Built Machines Fuel Transfer Pump
D6T Track-Type Tractor Systems Piston Pump (Steering) - Test and Adjust