TS180, TS185, TS220 and TS225 Towed Scrapers Declaration of Conformity Caterpillar


Declaration of Conformity
`

Table 1
An EC Declaration of Conformity document was provided with the machine if it was manufactured to comply with specific requirements for the European Union. In order to determine the details of the applicable Directives, review the complete EC Declaration of Conformity provided with the machine. The extract shown below from an EC Declaration of Conformity for machines that are declared compliant to "2006/42/EC" applies only to those machines originally "CE" marked by the manufacturer listed and which have not since been modified.    
   

EC DECLARATION OF CONFORMITY OF MACHINERY
   
   

Manufacturer: AVSpare ELKADER LLC, 1003 MILLER STREET, ELKADER, IA 52043, USA
   

Person authorized to compile the Technical File and to communicate relevant part (s) of the Technical File to the Authorities of European Union Member States on request:
   
    Standards & Regulations Manager,AVSpare France S.A.S 40,
Avenue Leon-Blum, B.P. 55, 38041 Grenoble Cedex 9, France    
I, the undersigned, _________, hereby certify that the construction equipment specified hereunder    
Description:
   
Generic Denomination:     Earth-moving Equipment        


   
Function:     Scraper            


   
Model/Type:     TS180, TS185, TS220, TS225            


   
Serial Number:                


   
Commercial Name:     AVSpare
   
       
Fulfils all the relevant provisions of the following Directives        

   
                       
    Directives     Notified Body    
Document No.    
   
    2006/42/EC     N/A            
                           

   
                   
           
Done at:
   
        Signature            
Date:
   
        Name/Position            
                           
Note: The above information was correct as of July 2009, but may be subject to change, please refer to the individual declaration of conformity issued with the machine for exact details.    

Information System:

953D, 963D and 973D Track-Type Loaders Hydraulic System Pressure Is High
D7E Track-Type Tractor Hydraulic, HVAC, and Electrical Systems Implement Cycle Time Is Slow for All Implements
613G Wheel Tractor-Scraper Maintenance Interval Schedule
627G Wheel Tractor-Scraper Maintenance Interval Schedule
621G Wheel Tractor-Scraper Maintenance Interval Schedule
2009/07/27 New Air Lines and a New Air Motor Are Now Used to Improve the Capability of the Cold Start {1450, 1451, 1462, 1466}
2009/09/28 New Software Released For AccuGrade Office {5267, 7220}
D7E Track-Type Tractor Hydraulic, HVAC, and Electrical Systems Implement Hydraulic Force Is Low
2009/07/27 Improved Procedure for the Retention of the Identification Film for the Roll Over Protective Structure (ROPS) and Falling Object Protective Structure (FOPS) {7323, 7325, 7405, 7557}
2010/01/06 A New Lip Seal for the Final Drive Is Now Used {4050, 4052}
2012/04/09 Improved Friction Disc and Software for the Torque Converter Impeller Clutch on 988H Wheel Loaders {3101, 7610, 7620}
953D, 963D and 973D Track-Type Loaders Hydrostatic Drive Is Sluggish
953D Track-Type Loader Declaration of Conformity
2011/01/06 Improvements to the Fuel Sender Group {1273, 1408, 6201, 7481, 7857}
D9T Track-Type Tractor Battery Disconnect Switch
D7E Track-Type Tractor Hydraulic, HVAC, and Electrical Systems Hydraulic Cylinder Collapse - The Lift Cylinder Will Collapse When The Control Is In The Raised Position
D7E Track-Type Tractor Hydraulic, HVAC, and Electrical Systems Implement Does Not Raise
Procedure to Install Improved Brake Oil Cooler Tubes{1380}
Procedure To Install New Heat Shields{1067, 1073}
950H Wheel Loader, 962H Wheel Loader and IT62H Integrated Toolcarrier Electrohydraulic System Piston Pump (Implement) (Pilot)
C13, C15, and C18 Tier 4 Final Engines Cylinder Head Valves
2010/12/23 Introduction of Improved Roading Lights for Medium Wheel Loaders {1429}
950H Wheel Loader, 962H Wheel Loader and IT62H Integrated Toolcarrier Electrohydraulic System Relief Valve (Line)
C15 and C18 Engines for Caterpillar Built Machines Fuel Transfer Pump