966H and 972H Wheel Loaders Declaration of Conformity Caterpillar


Declaration of Conformity
`
966H and 972H Wheel Loaders [SEBU7887]
BASIC ENGINE
966H and 972H Wheel Loaders Declaration of Conformity

Table 1
An EC or EU Declaration of Conformity document was provided with the machine if it was manufactured to comply with specific requirements for the European Union. In order to determine the details of the applicable Directives, review the complete EC or EU Declaration of Conformity provided with the machine. The extract shown below from an EC or EU Declaration of Conformity for machines that are declared compliant to "2006/42/EC" applies only to those machines originally "CE" marked by the manufacturer listed and which have not since been modified. 
 
EC or EU DECLARATION OF CONFORMITY 
 
Manufacturer: AVSpare Inc., 100 N.E. Adams Street, Peoria, Illinois 61629, USA 
Person authorized to compile the Technical File and to communicate relevant part (s) of the Technical File to the Authorities of European Union Member States on request: 
  Standards & Regulations Manager, AVSpare France S.A.S 40,
Avenue Leon-Blum, B.P. 55, 38041 Grenoble Cedex 9, France 
I, the undersigned, _________, hereby certify that the construction equipment specified hereunder 
Description:  Generic Denomination:  Earth moving Equipment   
  Function:  Wheeled loader     
  Model/Type:  966H Wheel Loader
972H Wheel Loader 
   
  Serial Number:       
  Commercial Name:  AVSpare
 
   
Fulfils all the relevant provisions of the following Directives   
             
  Directives  Notified Body  Document No.   
  2006/42/EC  N/A     
  2000/14/EC amended by 2005/88/EC, Note (1)       
  2004/108/EC  N/A     
  2014/30/EU  N/A     
             
Note (1)  Annex -_____ Guaranteed Sound Power Level -____dB (A)
Representative Equipment Type Sound Power Level - ____dB (A)
Engine Power per ____-____ kW Rated engine speed - ____ rpm
Technical Documentation accessible through person listed above authorized to compile the Technical File 
 
           
     
Done at:      Signature     
Date:      Name/Position     
             
Note: The above information was correct as of June 2009, but may be subject to change, please refer to the individual declaration of conformity issued with the machine for exact details. 

Information System:

953D, 963D and 973D Track-Type Loaders Hydraulic System Pressure Is Low
C13, C15, and C18 Tier 4 Interim Engines ARD Temperature Is Low
Procedure to Improve the Starting Capability on 627G and 637G Wheel Tractor-Scrapers{0645, 1456, 1920, 7620}
2010/02/03 A New "B" Pin Bearing Has Been Designed for the Bucket of Medium Wheel Loaders that Are Used As Steel Mill Machines Working in Severe Applications {6107, 7000}
D7E Track-Type Tractor Hydraulic, HVAC, and Electrical Systems Implement Movement Without Request
C15 and C18 Engines for Caterpillar Built Machines Flywheel - Remove and Install
C9.3 Engines for Caterpillar Built Machines Soot Antenna - Remove and Install
AD30 Underground Articulated Truck Safety Messages
Installation of the CAES ARO Groups{7604}
D6T Track-Type Tractor Camera - Clean/Adjust
14L Motor Grader Water Pump - Remove and Install
C9.3 Engines for Caterpillar Built Machines Engine Oil Cooler - Remove and Install
IT38H Integrated Toolcarrier and 938H Wheel Loader Declaration of Conformity
C9.3 Tier 4 Final Engines Diesel Particulate Filter Has High Ash Load
D7E Track-Type Tractor Hydraulic, HVAC, and Electrical Systems Implement Droops Before Raising
2009/10/01 A New Slip Joint Group Improves Service Life of the Drive Shaft {3251}
953D, 963D and 973D Track-Type Loaders Hydraulic System Hesitates
953D, 963D and 973D Track-Type Loaders Machine Movement Is Unstable
953D, 963D and 973D Track-Type Loaders Machine Top Speed Is Not Obtained
953D, 963D and 973D Track-Type Loaders Hydrostatic Drive Is Sluggish
2012/04/09 Improved Friction Disc and Software for the Torque Converter Impeller Clutch on 988H Wheel Loaders {3101, 7610, 7620}
2010/01/06 A New Lip Seal for the Final Drive Is Now Used {4050, 4052}
2009/07/27 Improved Procedure for the Retention of the Identification Film for the Roll Over Protective Structure (ROPS) and Falling Object Protective Structure (FOPS) {7323, 7325, 7405, 7557}
D7E Track-Type Tractor Hydraulic, HVAC, and Electrical Systems Implement Hydraulic Force Is Low