D9T Track-Type Tractor Declaration of Conformity Caterpillar


Declaration of Conformity
`

Table 1
An EC or EU Declaration of Conformity document was provided with the machine if it was manufactured to comply with specific requirements for the European Union. In order to determine the details of the applicable Directives, review the complete EC or EU Declaration of Conformity provided with the machine. The extract shown below from an EC or EU Declaration of Conformity for machines that are declared compliant to "2006/42/EC" applies only to those machines originally "CE" marked by the manufacturer listed and which have not since been modified. 
 
ORIGINAL EC or EU DECLARATION OF CONFORMITY 
 
Manufacturer:AVSpare Inc., 100 N.E. Adams Street, Peoria, Illinois 61629, USA 
Person authorized to compile the Technical File and to communicate relevant part (s) of the Technical File to the Authorities of European Union Member States on request: 
  Standards & Regulations Manager,AVSpare France SAS
40 Avenue Leon-Blum 38000 Grenoble, France 
I, the undersigned, _________, hereby certify that the construction equipment specified hereunder 
Description:  Generic Denomination:  Earth-moving Equipment   
  Function:  Steel Tracked Dozer     
  Model/Type:  D9T     
  Serial Number:       
  Commercial Name:  AVSpare     
Fulfils all the relevant provisions of the following Directives   
             
  Directives  Notified Body  Document No.   
  2006/42/EC  .....N/A.....     
  2000/14/EC amended by 2005/88/EC, Note (1)       
  2014/30/EU  .....N/A.....     
             
Note (1)  Annex -_____ Guaranteed Sound Power Level -_____dB (A)
Representative Equipment Type Sound Power Level - _____dB (A)
Engine Power per ____-____ kW Rated engine speed - _____ rpm
Technical Documentation accessible through person listed above authorized to compile the Technical File 
 
           
     
Done at:      Signature     
Date:      Name/Position     
             
Note: The above information was correct as of September, 2009, but may be subject to change, please refer to the individual declaration of conformity issued with the machine for exact details. 

Information System:

D10T Track-Type Tractor Declaration of Conformity
D8T Track-Type Tractor Declaration of Conformity
3500 Engines Exhaust Elbow - Remove and Install
2009/07/06 New AMOCS Seals That Are Between the Radiator Core and the Tank Are Now Available on Certain Track-Type Tractors and Pipelayers {1353}
C9.3 Engines for Caterpillar Built Machines Temperature Sensor (DPF) - Remove and Install
Pivot Shaft Seal Leaks On D6K, D6N, And Track-Type Loaders{4153}
C9.3 Engines for Caterpillar Built Machines Flame Detection Temperature Sensor - Remove and Install
3512B, 3512C, and 3516B Generator Set Engines with Dynamic Gas Blending Air Starting System
C13, C15, and C18 Tier 4 Interim Engines Sensor Supply - Test
C4.4 Industrial Engine Piston Height - Inspect
C3.4B Engines for Caterpillar Built Machines Piston Ring Groove - Inspect
973D Track-Type Loader Power Train Brake and Final Drive Group
Installation of the Angling Blade Bulldozer on the D7E Track-Type Tractor{6050, 6701}
3500 Engines Exhaust Manifold - Remove and Install
953D, 963D and 973D Track-Type Loaders Hydraulic System Has Unusual Noise
C9.3 Engines for Caterpillar Built Machines Air Cleaner Housing - Remove and Install
D6T Track-Type Tractor Systems Pressure Reducing Valve - Test and Adjust
C13, C15, and C18 Tier 4 Interim Engines ARD Does Not Activate
C9.3 Engines for Caterpillar Built Machines Diesel Particulate Filter - Remove and Install - Diesel Oxidation Catalyst, Clean Emissions Module
973K Track-Type Loader Systems Piston Motor (Hydrostatic)
953D, 963D and 973D Track-Type Loaders Hydraulic System Oil Contains Air
2009/08/24 A Hydraulic Suction Line on D6R Series III Track-Type Tractors Has a New Clamp {5057}
C9.3 Tier 4 Final Engines Lubrication System
2009/09/07 Protective Covers For the Joint On the Equalizer Bar Are Now Used {7206}