D10T Track-Type Tractor Declaration of Conformity Caterpillar

Declaration of Conformity

D10T Track-Type Tractor [SEBU7764]

D10T Track-Type Tractor Hydraulic System Filter Bypass Screen - Clean

D10T Track-Type Tractor Mounting and Dismounting

ENGINE ARRANGEMENT

ENGINE AR

D10T Track-Type Tractor Declaration of Conformity

D10T Track-Type Tractor Engine Lockout Switch

Show/hide table

Table 1
An EC Declaration of Conformity document was provided with the machine if it was manufactured to comply with specific requirements for the European Union. In order to determine the details of the applicable Directives, review the complete EC Declaration of Conformity provided with the machine. The extract shown below from an EC Declaration of Conformity for machines that are declared compliant to "2006/42/EC" applies only to those machines originally "CE" marked by the manufacturer listed and which have not since been modified.


EC DECLARATION OF CONFORMITY OF MACHINERY

Manufacturer: AVSpare INC.100 N.E. ADAMS STREET PEORIA, IL 61629 USA
Person authorized to compile the Technical File and to communicate relevant part (s) of the Technical File to the Authorities of European Union Member States on request:
			Standards & Regulations Manager,AVSpare France S.A.S 40, Avenue Leon-Blum, B.P. 55, 38041 Grenoble Cedex 9, France
I, the undersigned, _________, hereby certify that the construction equipment specified hereunder
Description:		Generic Denomination:	Earth-moving Equipment
		Function:	Steel Tracked Dozer
		Model/Type:	D10T
		Serial Number:
		Commercial Name:	AVSpare
Fulfils all the relevant provisions of the following Directives

	Directives		Notified Body	Document No.
	2006/42/EC		.....N/A.....
	2000/14/EC amended by 2005/88/EC, Note (1)
	2004/108/EC		.....N/A.....

Note (1)		Annex -_____ Guaranteed Sound Power Level -_____dB (A) Representative Equipment Type Sound Power Level - _____dB (A) Engine Power per ____-____ kW Rated engine speed - _____ rpm Technical Documentation accessible through person listed above authorized to compile the Technical File


Done at:				Signature
Date:				Name/Position

Note: The above information was correct as of September, 2009, but may be subject to change, please refer to the individual declaration of conformity issued with the machine for exact details.