627G Wheel Tractor-Scraper Declaration of Conformity Caterpillar


Declaration of Conformity
`
627G Wheel Tractor-Scraper [SEBU7858]
ENGINE ARRANGEMENT
MISCELLANEOUS INFORMATION
627G Wheel Tractor-Scraper Declaration of Conformity

Table 1
An EC Declaration of Conformity document was provided with the machine if it was manufactured to comply with specific requirements for the European Union. In order to determine the details of the applicable Directives, review the complete EC Declaration of Conformity provided with the machine. The extract shown below from an EC Declaration of Conformity for machines that are declared compliant to "2006/42/EC" applies only to those machines originally "CE" marked by the manufacturer listed and which have not since been modified. 
EC DECLARATION OF CONFORMITY OF MACHINERY 
 
Manufacturer: AVSpare Inc., 100 N.E. Adams Street, Peoria, Illinois 61629, USA 
Person authorized to compile the Technical File and to communicate relevant part (s) of the Technical File to the Authorities of European Union Member States on request: 
  Standards & Regulations Manager,AVSpare France S.A.S 40 , Avenue Leon-Blum, B.P. 55, 38041 Grenoble Cedex 9, France     
I, the undersigned, _________, hereby certify that the construction equipment specified hereunder 
Description:  Generic Denomination:  Earth-moving Equipment   
  Function:  Scraper     
  Model/Type:  627G     
  Serial Number:       
  Commercial Name:  AVSpare
 
   
Fulfils all the relevant provisions of the following Directives   
             
  Directives  Notified Body  Document No.   
  2006/42/EC  N/A     
  2004/108/EC   N/A      
             
           
     
Done at:      Signature     
Date:      Name/Position     
Note: The above information was correct as of July 2009, but may be subject to change, please refer to the individual declaration of conformity issued with the machine for exact details. 

Information System:

623G Wheel Tractor-Scraper Declaration of Conformity
621G Wheel Tractor-Scraper Declaration of Conformity
2009/06/29 Fuel Injection Pump Latch Valve for 3054C Engines {1251}
2009/05/25 Correction to the Disassembly and Assembly , "Tailgate - Install" {7250, 7271}
2009/05/25 Correction to the Disassembly and Assembly , "Tailgate - Remove" {7250, 7271}
3516B Engine for 994F and 994H Wheel Loaders Power Is Intermittently Low or Power Cutout Is Intermittent
AccuGrade</SUP> GPS / Single UTS / Site and Laser Reference v11 for Excavators Excavator Arm Sensors - Calibrate - PSC System
2009/08/17 A Hotline for the Fuel Systems for Hydraulic Electronic Unit Injectors (HEUI) Is Now Available. {1251, 1290}
C9.3 Engines for Caterpillar Built Machines Fuel Lines - Remove and Install
Procedure For Replacing The Harness Between The Chassis And The Hitch{1408}
2009/05/25 Correction to the Service Manual , "Ejector Body" {7258}
D5R Track-Type Tractor Steering Is Harsh
631G Wheel Tractor-Scraper Declaration of Conformity
637G Wheel Tractor-Scraper Declaration of Conformity
657G Wheel Tractor-Scraper Declaration of Conformity
613G Wheel Tractor-Scraper Declaration of Conformity
988G Wheel Loader Power Train Torque Converter (Lockup) - Disassemble - Type 2
2009/06/22 Improvements Have Been Made to the Lift Cylinder {5102}
D6T Track-Type Tractor Systems Hydraulic Tank and Filter
988G Wheel Loader Electrohydraulic System MID 082 - CID 1964 - FMI 08
973D Track-Type Loader Machine Systems Fuel Tank
3500B Engines for Caterpillar Built Power Modules Fuel Injector Mechanism
D6T Track-Type Tractor Hydraulic System Piston Pump (Implement)
C9.3 Engines for Caterpillar Built Machines Fuel Manifold (Rail) - Remove and Install