The Product Identification Number (PIN) will be used to identify a powered machine that is designed for an operator to ride.
AVSpare products such as engines, transmissions and major attachments that are not designed for an operator to ride are identified by Serial Numbers.
For quick reference, record the identification numbers in the spaces that are provided below the illustration.
| |
| Illustration 1 | g01359040 |
Machine PIN____________________
| |
| Illustration 2 | g00422004 |
Transmission Serial Number____________________
| |
| Illustration 3 | g00422006 |
Engine Serial Number____________________
| |
| Illustration 4 | g01359044 |
 |
|
Structural damage, an overturn, modification, alteration, or improper repair, can impair this structure's protective capability thereby voiding this certification. Do not weld on or drill holes in the structure. Consult a AVSpare dealer to determine this structure's limitations without voiding its certification. |
This machine has been certified to the standards that are listed on the certification plate. The maximum mass of the machine, which includes the operator and the attachments without payload, should not exceed the mass on the certification plate.
Note: This plate is on machines that are used in the European Union.
The certification plate (CE) is used to verify a product's conformance to all of the requirements that were established by a country or by a group of countries. The product is tested by a testing group in order to verify conformance.
| |
| Illustration 5 | g01089621 |
This plate is located on the left side of the front frame.
PIN____________________
Model____________________
Power (kW)____________________
Weight (kg)____________________