613 TRACTOR-SCRAPER Fuel And Lubricant Specifications Caterpillar

Fuel And Lubricant Specifications
1.1. Diesel Fuel
2.1. Lubricating Grease (MPGM)
3.1. Multipurpose-type Gear Lubricant (MPL)
4.1. Engine Oils (EO)
5.1. Hydraulic Oil (HYDO)
6.1. Hydraulic Brake Fluid (BF)

NOTE: The abbreviations listed below follow S.A.E. J754 nomenclature. The classifications follow S.A.E. J183 classifications. The MIL specifications are U.S.A. Military Specifications. These definitions will be of assistance in purchasing. The specific classifications for this machine are found on the "RECOMMENDED LUBRICANTS" chart.

Diesel Fuel

Use only distillate fuels (ASTM No. 1 or No. 2 Fuel Oil or No. 1D or No. 2D Diesel Fuel Oil) with a minimum cetane number of 35. Heavier oil is generally preferable because of its higher energy content. Contact your AVSpare dealer regarding fuels marketed in your area.

Lubricating Grease (MPGM)

Use Multipurpose-type Grease ( MPGM) which contains 3-5% molybdenum disulfide conforming to MIL-M-7866, and containing a suitable corrosion inhibitor. NLGI No. 2 Grade is suitable for most temperatures. Use NLGI No. 0 or No. 1 Grade for extremely low temperatures.

Multipurpose-type Gear Lubricant (MPL)

Use Gear Lubricant Classification GL-5, or MIL-L-2105B.

Engine Oils (EO)

CD - Use oils that meet Engine Service Classification CD or MIL-L-2104C.

CC - Use oils that meet Engine Service Classification CC, MIL-L-2104B or MIL-L-46152.

EO - CD or CC.

Hydraulic Oil (HYDO)

Use ( EO) or industrial-type hydraulic oils which are certified by the supplier as having anti-wear, anti-foam, anti-rust and anti-oxidation additive properties for heavy duty use.

Hydraulic Brake Fluid (BF)

Use heavy duty hydraulic brake fluid meeting the requirements of SAE J1703c.