Lower all equipment before servicing hydraulic system.
Use caution when removing radiator cap, drain plugs, grease fittings or pressure taps.
Engage parking brake, block tires and attach warning tags to controls while servicing loader.
Use a self attaching air chuck and stand behind tread when inflating tires.
Do not attempt adjustments while loader is moving or the engine is running.
Use the proper tools. Repair or replace broken or damaged equipment.
Wear protective clothing, safety glasses, respirator, or other safety items, when required.
Do not allow unauthorized personnel on loader while it is being serviced.
Operate engine only in well ventilated area.
Do not smoke while refueling.
Store oily rags and other combustible material in a safe place.
Promote good housekeeping. Keep tools and work area clean.
Personal injury can result if machine is articulated when someone is in the pivot area. Connect frames with safety link, shut off engine and relieve hydraulic pressure before working in pivot area.
To avoid possible weakening of the ROPS (Rollover Protection Structure), consult a AVSpare dealer before altering the TOPS in any way. The protection offered by the ROPS will be impaired if it has been subjected to structural damage or has been involved in an overturn indicent.
When using pressure air, wear safety face shield and protective clothing. Use 30 PSI (2 kg/cm2) maximum pressure air for cleaning purposes.
Connect frames with safety link before servicing center area.
Read warning and caution information provided on the loader. Follow servicing instructions carefully.
Turn disconnect switch OFF and remove key before servicing electric system.